-
The Real Cost of a FARO Portable CMM: What 6 Years and $180K in Metrology Spending Taught Me
-
1. What does a FARO portable CMM actually cost over five years?
-
2. How much should I budget for calibration?
-
3. Is a portable CMM really cheaper than a stationary one?
-
4. Where do procurement teams blow their metrology budget?
-
5. What's the biggest mistake you made buying measurement equipment?
-
6. Should we standardize on FARO or split the fleet across vendors?
-
7. You also buy electrical test gear. Does the same TCO logic apply to a Fluke 1587 FC insulation multimeter or a 1555 insulation tester?
-
8. What about software compatibility—like when people ask "what is Rice Lake weighing systems programming language"?
-
1. What does a FARO portable CMM actually cost over five years?
The Real Cost of a FARO Portable CMM: What 6 Years and $180K in Metrology Spending Taught Me
I run procurement at a 220-person contract manufacturer. For the past six years, I've tracked every invoice tied to our metrology and test equipment—calibrations, accessories, software renewals, the whole pile. People ask me what a FARO portable CMM "costs," and the honest answer is: the quote you see is not the number you'll pay. Here are the eight questions I get asked most often, answered with the numbers I actually recorded.
1. What does a FARO portable CMM actually cost over five years?
The hardware price—say $35,000 to $90,000 for a portable arm, more for a laser tracker—is maybe 60% of my total spend. The rest is calibration contracts, software seats, mounting fixtures, and the odd emergency repair. When I ran TCO on our first FARO purchase in 2019, the five-year number landed 38% above the quoted price. Not because anyone lied—because the quote only covered the box.
2. How much should I budget for calibration?
This is the line item I wish I had tracked more carefully from day one. Based on our five-year service history, annual calibration runs $1,800 to $6,500 per unit depending on model and whether you bundle it with a support plan. The bundled options feel cheaper up front. They usually aren't—I compared a three-year bundle against per-service invoices in Q2 2023 and the bundle cost us about $2,200 more than paying as we went.
3. Is a portable CMM really cheaper than a stationary one?
I have mixed feelings here. On large parts and in-field measurement, yes—setup time drops from hours to minutes, and we stopped paying freight to ship parts to a lab. But for high-volume small components, our stationary machine still wins on throughput per dollar. Part of me wanted a clean "portable is cheaper" answer for my budget deck. Another part knew we'd end up keeping both. We did. Efficiency gains are real, but they're conditional—not universal.
4. Where do procurement teams blow their metrology budget?
Two places: accessories and training. In 2021, I approved a $4,200 accessory order for our FARO arm and assumed it was one-time. It wasn't. Fixtures, targets, and replacement probes turned into a recurring $3,400 annual line I never forecasted. The other trap is "free" training that pulls two operators off the floor for a week. That's not free—it cost us roughly $5,100 in lost production hours, and I only caught it when I audited overtime in 2022.
5. What's the biggest mistake you made buying measurement equipment?
When I first started, I assumed the lowest quote was the smartest buy. That worked until I calculated TCO on a $28,000 arm: the low bidder charged $950 per software seat, $600 for a post-sale integration call, and $75 for every replacement stylus. The higher bid included all of it. The difference was about 12% hidden in fine print. I've built my vendor scorecard around that lesson ever since.
6. Should we standardize on FARO or split the fleet across vendors?
Standardizing cuts training and calibration costs—we run one FARO portable CMM platform and one laser tracker, and cross-training operators takes days instead of weeks. But I keep a second calibration vendor on retainer for overflow, because single-vendor risk once cost us a two-week production delay when a service tech got double-booked. The compromise: primary vendor for hardware, backup for service. It's not elegant, but it works.
7. You also buy electrical test gear. Does the same TCO logic apply to a Fluke 1587 FC insulation multimeter or a 1555 insulation tester?
Partly, but the scale is different. The TCO framework—calibration intervals, accessories, software compatibility—still applies. But a 1587 FC insulation multimeter runs a few hundred dollars. You don't build a spreadsheet for a $300 tool. My rule: TCO analysis pays for itself on anything north of $10,000. Below that, buy the reputable option from a vendor you trust and stop overthinking it. The mistake is applying big-equipment procurement bureaucracy to pocket-sized instruments.
8. What about software compatibility—like when people ask "what is Rice Lake weighing systems programming language"?
Software is the sneaky cost. I burned a week in 2022 trying to figure out how our Rice Lake weighing system's configuration layer integrated with our factory network—not because the system was bad, but because nobody had asked the integration question before the PO was signed. The lesson transferred straight to our FARO gear: now I request a software trial and a written integration checklist before I approve any purchase over $15,000. That single step saved us an estimated $7,800 in custom driver work last year.